8(800) 350-02-48
Free call in Russia
Sales department +7 (812) 612-30-03
Department of metrology +7(4932) 23-28-44
Design department +7(4932) 23-67-15
Production of our goods on the territory of the Russian Federation is confirmed by the conclusion of Ministry of Industry and Trade Russia according to expert opinion of Ivanovo Chamber of Commerce and Industry Read more...
- Tensile Testing Machines and Accessories
- Grips and Devices for Tensile Testing Machines
- Impact Testers
- Hardness testers
- Metallography Equipment
- Inprocess Testing Machines
- Machines for Testing Road and Building Materials
- Spring Testing Machines
- Friction and Wear Testing Machines
- Machines and Systems for Temperature Testing
- Portable Dynamometers
- General Purpose Dynamometers
- Standard Hardness Test Blocks
- Shoe testing tools
2168 UMT
The machine is universal, designed to test friction, antifriction and lubricants for friction and wear in a wide range of modes.
A large set of interchangeable devices allows you to quickly rebuild the machine for various test circuits that simulate the operation of tribological couplings in friction units.
Test schemes are provided: During rotation: -thumb drive (Kvz=0), - ring-ring (Kvz=1, frictional heat resistance), - sleeve-shaft, - disk-block (brake).
When swinging: - disk-block, - sleeve-shaft, - shaft-tube (vibration wear). When reciprocating: finger pin (linear contact).The drive of the machine is electromechanical with smooth speed control. The friction moment meter is electromechanical. The samples are clamped pneumatically (from the mains or from the cylinder), the measurement of the clamping force is gauge. Cooling - water (from the water supply). Programming test modes is possible.
In the process of testing, the friction moment, clamping force, temperature, speed, friction path are measured. Possible access to a computer. The machine is mounted on vibration mounts; a special foundation is not required.
| TECHNICAL SPECIFICATIONS | |||
| Pressure measuring ranges, H ranges | I: | from 200 to 1000 | |
| II: | from 1000 to 5000 | ||
| Ranges (I-IV) of measurement of frequency of rotation, min-1 | |||
| spindle | crank (rolling) | ||
| I | 15..150 | 6..60 | |
| II | 30..300 | – | |
| III | 150..1500 | - | |
| IV | 300..3000 | - | |
| Ranges of measurement of the moment of friction in the ranges of speed, N | I и III | 4..40 | |
| II и IV | 2..20 | ||
| The number of steps for changing the shaft speed | 10 | ||
| The radii of the installation of samples according to the scheme "finger-disk", mm | 60, 90, 120 и 150 | ||
| The limits of measurement of the swing angle of the sample, deg. | ±(3..30) | ||
| Limits of measuring the value of the stroke of translational movement, mm | 0..14 | ||
| Maximum power, kW (power) | 16 (3N, 380V, 50Hz) | ||
| Compressed air pressure, MPa | 0,5..0,6 | ||
| test facility | remote control | power console | |
| Overall dimensions, mm | 760 х 1750 х 1900 | 650 х 850 х 1700 | 600 х 750 х 900 |
| Weight, kg | 1200 | 230 | 30 |