8(800) 350-02-48

Free call in Russia

Sales department +7 (812) 612-30-03

Department of metrology +7(4932)   23-28-44

Design department +7(4932)   23-67-15

Testing Instruments Factory, LLC modernizes and repairs testing equipment previously released from production
Production of our goods on the territory of the Russian Federation is confirmed by the conclusion of Ministry of Industry and Trade Russia according to expert opinion of Ivanovo Chamber of Commerce and Industry   Read more...
Since June 2016 our factory has extended a warranty period for its products
up to 2 years

IH 5111

Device for testing wire, strips and ribbons for bending

The device is intended for testing kinks of ferrous and non-ferrous metals and their alloys in accordance with GOST 1579, as well as sheets and strip strips for kinking in accordance with GOST 13813.

It can also be used to test other materials, including samples from bimetals, within its technical capabilities.
Execution – desktop.
The principle of operation of the device is based on the bending of the sample, clamped in the jaws of a vice, to the right and left by 90°; until fracture or until the number of kinks reaches the specifications for the test material. The drive of the device is manual.

The number of simultaneously tested samples 1
The distance from the upper forming rollers to the lower edge of the leash, mm from 5 to 50
The angle of deviation of the lever to the right and left of the vertical, deg. 90 + 3
Sample preload force, N from 1 to 60
The sizes of the tested samples, mm
diameter over 0.5 to 5
length from 100 to 150
   shaped wire:
circle diameter over 0.5 to 5
length from 100 to 150
thickness over 0.3 to 3
width 20 -5
length from 100 to 150
Overall dimensions, mm, (length x width x height) 335х205х480
Weight, kg
device 17,5
appliance with case 23,0